In the Dark? Find Us Fast.

To report an outage, call (800) 535-1079 or (580) 363-1260.

Outage Map Report an Outage

Your Power is Off. What Should You Do?

  1. Verify your entire house is out. Check fuses or breakers.
  2. If you have determined your home is out of power, unplug any appliances you were using when the power went out. Leave a light on so you know when power is restored.
  3. If your power remains out for more than a few minutes:
    • Report the outage through the KEC website, your SmartHub app, or call KEC’s Outage Line at (800) 535-1079 or (580) 363-1260.
    • If the outage is widespread, our phone lines may be busy when you call. Please be patient; your call is important to us.
  4. When you report an outage, provide as many details as possible. If you heard a loud bang or your neighbors have power, let us know. This will help us restore power as quickly as possible.

Outage Notifications

How to Check Circuit Breakers

Restoring Power

The Steps to Restoring Power (PDF)

Outage FAQs

How does KEC restore your power in an outage?

Outages occur for a number of reasons. In the event of a large or wide-spread outage, we prioritize repairs in order to get the largest number of members back on first.

  • First, we check and repair any damaged transmission lines. These are the lines that bring power to our electrical system.
  • Equipment or line repairs at substations will be done next in order to transfer power from transmission lines to the main distribution lines throughout our service area.
  • After the substations are repaired, we turn our attention to our main distribution lines, and then to tap lines, which carry electricity from the main distribution lines to smaller groups of members.
  • Once all distribution lines and tap lines are repaired, we begin working on service lines, which typically bring power to only one or two locations.

Restoring power during inclement weather or after a large accident can be a big job. Kay Electric maintains a 24-hour, 365 day-a-year dispatch center so if you should lose power, be assured we’re working as quickly as possible to get your lights back on.

What causes the lights in my house to flicker or blink?

A "power blink" is when your lights appear to flicker for just a split second up to a few seconds. Power blinks occur when an object, such as a tree limb, comes into contact with a power line or other equipment. To prevent an extended outage, damage to the line, or your home, a "recloser" will sense a change in current caused by the obstruction and briefly interrupt electricity up to a second or two to clear the fault current.  This is a normal safety feature designed for an electrical distribution system, and there is no need to report power blinks. There is no need to report power blinks.

Occasionally during an outage, your power may temporarily go out after being restored. In these situations, it usually means linemen are working on a power line or other electrical equipment in order to restore power to other members.

What can I do to help get my power back on?

Before calling to report an outage, check your home’s breaker panel (and any outdoor disconnects) to make sure the outage is not due to a tripped breaker. Check to see if your neighbors are also out of power. This will help you determine if the problem exists within your home, or on Kay Electric’s system.

If you determine the problem is outside of your home, report your outage to Kay Electric.

Login online, or call (800) 535-1079 or (580) 363-1260.

You will need the following information available when you call:

  • Name on the account
  • Account number or phone number on the account
  • Any details related to the outage

Please let us know if you heard a loud bang, saw damaged equipment, or if your neighbors have power but you do not.

How do you decide whose power to restore first?

The outage restoration process begins at the point where power feeds into Kay Electric’s system. This could be at a substation, transmission line, or a main distribution line. After these repairs have been made, crews work on remaining outages and correct the trouble, beginning with areas serving the greatest number of members and continuing until electricity is restored to each member’s home.

If you see a Kay Electric service crew passing but not stopping, it is because work must first be performed at a nearby location or device before electric service can be restored to your home. Following the outage restoration process ensures all members have their power restored as quickly and safely as possible.

On occasion, your power may go out while your neighbor's power remains on. There are a couple reasons this could happen. Remember to check for a tripped breaker or other electrical problems to rule out an outage caused by something in your home. Your neighbor may also be receiving their electricity from a different power line or substation.

Why can’t you tell me how long it will take to restore my power?

Each outage is a result of different circumstances, and some may take longer to identify and restore than others. As a result, outage restoration information may not be immediately available.

In some sectors of our service territory, lineman must physically walk through remote territory to investigate the cause of an outage, which can be time consuming. Kay Electric often provides updates on the status of outages on our Facebook page.

How should I prepare for outages?

Kay Electric recommends having an emergency kit on hand so you are ready for any emergency. Include items like a portable radio, batteries, corded phone, and a flashlight. Store this kit in a designated place so it is easy to find.

How do I protect appliances in my house?

A lighting strike or downed power line can send a surge of electricity through your home, potentially damaging appliances. Computers, TV’s, and other electronic equipment are expensive investments that are worthy of protecting from storm-related damage. Surge protectors provide a defense against power spikes and surges.  During an electrical storm, it’s always best to disconnect/unplug items to protect them.

Is a generator safe to use when I lose power?

A generator can be a wonderful tool during an outage, especially if you have special medical needs and require electricity. But, it can also be extremely dangerous if used improperly. Be aware that it’s against the law, and a violation of electrical codes, to connect a generator to your home’s electrical circuits without a transfer switch or compliant isolation device. Otherwise, if a generator is online when electrical service is restored, it can become a major fire hazard. In addition, the improper connection of a generator to your home’s electrical circuits may endanger service crews helping to restore power in your area.  Read more generator safety tips:

Visit Kay Electric’s Home Backup Generators page to learn more about whole home generators and how to purchase.